Sight Reading Practice

Lessons › Instruments

How to read sheet music for guitar

Guitar music is written in the treble clef, but it sounds an octave lower than it looks. Once you know where the six open strings sit on the staff and how fingering and string markings work, standard notation becomes as useful to a guitarist as it is to any other musician.

Why learn notation if you already read tab?

Tablature (tab) shows which string to play and at which fret. It is quick to learn and very good at showing where to play a note. What it usually does not show is rhythm: most tab gives no note lengths at all, so you need to have heard the song to play it. Standard notation shows pitch and rhythm together, and it is the language of classical guitar, jazz charts, theory books, choir and band parts, and most music written for other instruments.

The two work well together, and many guitar books print notation with tab underneath. Learning notation does not mean giving up tab. It means you can play music you have never heard, read a melody written for a singer or violinist, and talk about music with other players.

The guitar sounds an octave lower than written

The guitar’s range sits mostly below middle C. Written at its real pitch, guitar music would need either the bass clef or a forest of ledger lines below the treble staff. To avoid that, guitar music is written one octave higher than it sounds, in the treble clef. When you read middle C (C4) in a guitar part, you play a C that sounds an octave lower, at C3.

Some editions make this explicit with a small 8 under the treble clef, sometimes called the octave treble clef. Many do not, and simply assume the reader knows it is guitar music. Either way, you read the notes exactly as you would in the treble clef. Only the sound is an octave lower, and that is handled by the instrument, not by you.

The examples on this page play the notes at their written pitch, so they sound an octave higher than your guitar will.

The open strings on the staff

Learn the six open strings first. They are your landmarks, in the same way that middle C and treble G are landmarks for a pianist. From the lowest (string 6) to the highest (string 1), as written:

The six open strings as written, from string 6 (low E) to string 1 (high E).

The two lowest strings need ledger lines. That is why guitarists meet ledger lines below the staff much earlier than most treble clef readers. The quickest way to read them is by landmark: one ledger line below is C, two is A, three is F. Low E hangs just under the third. For more on this, see How to read ledger lines quickly.

First position: every note on every string

In first position your first finger covers the first fret, your second finger the second fret, and so on. Each string then gives you its open note plus the natural notes on frets 1 to 3. These are the notes most beginner guitar music uses.

StringOpenFret 1Fret 2Fret 3
1 (high E)E5F5G5
2 (B)B4C5D5
3 (G)G4A4
4 (D)D4E4F4
5 (A)A3B3C4
6 (low E)E3F3G3

The empty cells are sharps and flats. For example, the first fret of the G string is G♯ (or A♭), and the second fret of the high E string is F♯. Notice the pattern: the natural notes are a whole step apart except between B and C and between E and F, which are only one fret apart. That is why the B and E strings have a note on the first fret.

Here is a C major scale in first position, written as notation and then as tab:

C major in first position: C on the A string (fret 3), D, E and F on the D string, G and A on the G string, B and C on the B string.
e|-------------------------|
B|-------------------0--1--|
G|-------------0--2--------|
D|----0--2--3--------------|
A|-3-----------------------|
E|-------------------------|

The notation tells you the notes and their lengths. The tab tells you one place to play them. Reading both side by side for a few weeks is a good way to connect what you already know with the staff.

One note, several places

A piano has one key for each pitch. A guitar often has several places to play the same note. The E written in the top space (E5), for example, is the open high E string, but also the fifth fret of the B string, the ninth fret of the G string and the fourteenth fret of the D string. The notation shows the pitch; choosing where to play it is part of reading guitar music.

When the choice matters, the music tells you, using these markings:

Don’t confuse the two kinds of number. A plain 2 is a finger; a circled ② is a string.

Keys that suit the guitar

Because the open strings are E, A, D, G and B, keys that use those notes fit the guitar well. G, D, A and E major, and E and A minor, all appear often in guitar music. That means guitarists meet sharp keys more often than flat keys. Before you start a piece, check the key signature and find the sharps on the fretboard: in G major every F is F♯, which in first position is the fourth fret of the D string or the second fret of the high E string. See Key signatures made simple for the full pattern.

Chord symbols and melody

Much of the music guitarists read is a melody with chord symbols above it, such as G, Em, C and D7. The notation shows the tune; the symbols tell you which chord to strum or pick underneath. A good reading exercise is to play the melody line from the notation, then play it again while a friend (or a recording of yourself) plays the chords. For how chords look when they are written out as notes, see How to read chords and arpeggios.

A first reading exercise

This short melody is in G major and 3/4 time, and every note is in first position. Before you play, find the F♯ (fourth fret of the D string), count one bar of three out loud, and then play it straight through without stopping.

An eight-bar exercise in G major. Every note is in first position.

Common mistakes

How to practise

Ten minutes a day is enough to make real progress. Spend a few minutes in the note trainer on the treble clef, including the notes below the staff, until the first-position notes are automatic. Then read short melodies on the sight-reading page at Level 1 or 2 and play them on the guitar. With Check me and the microphone, the site listens to each note you play. Exact octave is off unless you turn it on, so the guitar’s lower octave still counts as correct. The microphone hears one note at a time, so check melodies rather than chords.

While you are learning the fretboard, tick Guitar tab above the music (it is also on every piece in the music library). A tab staff appears under the notes showing a string and fret for each one, chosen to keep your hand near the nut and to use open strings where they help. Read the note first, then glance at the tab to check where you would have played it; if you only read the tab, your note reading won’t improve. Turn it off again once the first-position notes come quickly.

Read short treble clef melodies and play them on your guitar. The microphone checks each note.

Start sight-reading