Sight Reading Practice

Lessons › Instruments

Which clef does my instrument read?

Most instruments read either the treble clef or the bass clef. A few read a C clef, some switch clefs for high or low passages, and some sound at a different pitch from the written note. This guide lists which clef each common instrument and voice reads, and what that means for how you practise.

What a clef decides

A clef at the start of the staff fixes one line to one note. Every other note follows from it. The same five lines can therefore mean different notes depending on the clef. Middle C, for example, sits one ledger line below the treble staff but one ledger line above the bass staff.

Middle C in the treble clef: one ledger line below the staff.
The same middle C in the bass clef: one ledger line above the staff.

Three kinds of clef are in everyday use:

Unpitched percussion, such as snare drum and drum kit, uses a fourth sign, the neutral clef (two short vertical bars). Here each line or space stands for a drum or cymbal rather than a pitch.

Composers choose the clef that keeps an instrument’s usual notes on the staff, so the player needs as few ledger lines as possible. That is the whole reason there is more than one clef.

The quick answer

This table covers the instruments people ask about most. “Other clefs” are ones you will meet for high or low passages, or in particular kinds of music. Instruments that sound at a different pitch from the written note are explained further down.

Instrument or voiceMain clefOther clefs
Piano, organ, harp, marimbaTreble and bass together (grand staff)
ViolinTreble
ViolaAltoTreble for high passages
CelloBassTenor and treble for high passages
Double bassBassTenor and treble in solo music
Guitar, ukulele, mandolinTreble
Bass guitarBass
Flute, piccolo, oboe, clarinetTreble
Saxophones (all sizes)Treble
BassoonBassTenor, occasionally treble
Trumpet, cornetTreble
French hornTrebleBass for low notes
TromboneBassTenor; alto for alto trombone; treble in brass bands
Euphonium, baritone hornBassTreble in brass bands
TubaBassTreble in brass bands
Recorder, glockenspiel, xylophoneTreble
TimpaniBass
Soprano and alto voicesTreble
Tenor voiceTreble, sounding an octave lowerBass in hymn books
Baritone and bass voicesBass

Treble clef instruments

The treble clef is the most widely read clef. Violin, flute, oboe, clarinet, saxophones, trumpet, horn, recorder and the higher tuned percussion all read it, as do guitar, ukulele and mandolin. The violin’s four open strings make a good picture of where a treble clef instrument lives: its lowest note, G3, is just below the staff, and most of its music sits on the staff and above it.

The violin’s open strings, G, D, A and E, in the treble clef.

Guitar is a special case. It reads treble clef, but it sounds an octave lower than written. You read the notes exactly as a violinist would; the lower sound comes from the instrument. The full story is in How to read sheet music for guitar.

If you are starting on any of these instruments, How to read treble clef notes is the lesson to read first.

Bass clef instruments

Cello, double bass, bassoon, trombone, euphonium, tuba, bass guitar and timpani all read the bass clef. So do the left hand of the piano and the lower men’s voices. The cello’s open strings show how the bass clef keeps a low instrument on the staff: only the bottom string needs ledger lines.

The cello’s open strings, C, G, D and A, in the bass clef.

The double bass and the bass guitar also read bass clef, but both sound an octave lower than written. Their open strings are written E2, A2, D3 and G3, and they sound an octave below that. Writing them an octave up keeps the music out of a pile of ledger lines below the staff.

The open strings of the double bass and bass guitar as written. They sound an octave lower.

For a full guide to the notes, see How to read bass clef notes.

Instruments that read two clefs at once

Instruments with a very wide range use the grand staff: a treble staff and a bass staff joined by a brace. Piano, organ, harp, marimba and celesta all read it. Usually the treble staff is for the right hand and the bass staff for the left, but either hand can read either staff, and sometimes both staves use the same clef for a while. See How to read the grand staff.

Several other instruments read one clef most of the time and change clef when the music goes high or low. A cellist reads bass clef, switches to tenor clef for higher passages and to treble clef for the highest ones. Bassoonists and trombonists also move into tenor clef. Horn players read treble clef but meet bass clef for the lowest notes. A clef change in the middle of a line is printed as a smaller clef sign, and it applies until the next clef appears.

Alto and tenor clef

The C clefs are less familiar, but they are not difficult once you know the rule: the line through the centre of the clef is middle C.

In the alto clef, middle C is the middle line. From the bottom, the lines are F3, A3, C4, E4 and G4. The viola reads alto clef almost all the time, moving to treble clef only for high passages. Its open strings are C3 (just under the first ledger line below the staff), G3 (the bottom space), D4 (the third space) and A4 (the space above the top line). The alto trombone also reads alto clef.

In the tenor clef, middle C is the fourth line. From the bottom, the lines are D3, F3, A3, C4 and E4. Cello, bassoon and trombone use it for their upper range, because it covers the notes that would otherwise sit on ledger lines above the bass staff.

A good way to learn either C clef is to start from middle C and read outward in steps, the same landmark method that works in the treble and bass clefs. Some players read alto clef by converting from treble or bass clef. That works as a stopgap, but, as with the bass clef, learning the clef’s own landmarks is faster in the long run. This site’s exercises use the treble and bass clefs for now.

Voices

Sopranos and altos read the treble clef at the pitch written. Basses and baritones read the bass clef. Tenors are the exception: in most choral music, tenor parts are written in the treble clef but sung an octave lower, often shown with a small 8 under the clef. In hymn books, where four parts share two staves, the tenor line is printed on the bass staff along with the bass part.

Singers who want to read well should learn both clefs eventually, because a piano accompaniment and a full score use both. For a method of reading pitches with your voice, see How to sight-sing.

Transposing instruments: when the written note isn’t the sounding note

Some instruments sound a different note from the one written. Music for them is written so that the same fingering always reads as the same written note, whichever size of the instrument you play. The real pitch, the one a piano would play, is called concert pitch.

A B♭ clarinet is the most common example. When a clarinettist plays a written C, the note that sounds is B♭, a whole step lower. To sound in C major alongside a piano, the clarinet part must be written in D major, a whole step higher:

An original phrase as written for B♭ clarinet, in D major.
The same phrase at concert pitch: it sounds in C major, a whole step lower.

The common transposing instruments are:

InstrumentA written C sounds as
B♭ clarinet, B♭ trumpet, cornet, soprano saxophoneB♭, a whole step lower
E♭ alto saxophoneE♭, a major sixth lower
B♭ tenor saxophone, bass clarinet (in treble clef)B♭, an octave and a whole step lower
E♭ baritone saxophoneE♭, an octave and a major sixth lower
French horn in F, cor anglais (English horn)F, a perfect fifth lower
Piccolo, xylophone, celesta, soprano recorderC, an octave higher
GlockenspielC, two octaves higher
Guitar, double bass, bass guitar, contrabassoonC, an octave lower

The instruments in the last three rows only change octave, so the note names stay the same. They are sometimes called octave-transposing instruments, and it helps to know which way each one moves.

In British-style brass bands every brass instrument except the bass trombone reads treble clef. Tenor trombones, baritone horns and euphoniums read it as B♭ instruments, sounding an octave and a whole step lower, and tubas read it as E♭ or B♭ instruments. The same euphonium player may read bass clef at concert pitch in an orchestra or concert band and treble clef in a brass band, so many euphonium and trombone players learn to read both.

As a player, you don’t transpose in your head. You read the written notes and use the fingerings you were taught for them. Transposition matters when you play from music written for a different instrument, or when you compare notes with a pianist or a tuner.

Which clef should you practise?

Practising on this site

The note trainer and the sight-reading exercises cover the treble and bass clefs, so they suit every instrument in the first two groups above, and both clefs together suit pianists. For note names, choose your clef in the trainer and work until the notes come instantly. For reading, play the exercises on your instrument.

Check me with the microphone hears the pitch you actually play, in any octave unless you tick Exact octave, so guitar, double bass and bass guitar work as they are. On a B♭ or E♭ instrument the sounding note differs from the written one, so the microphone will mark correct notes as wrong. On those instruments, use the exercises for reading practice and name the notes as written, or play them on the on-screen piano.

Choose treble or bass clef and drill the notes until you know them on sight.

Practise note names